Exact-code service & fitment

Honda Grace GM4: Tyre pressure, wheel fitment & maintenance

Keep pressure, tyre package, wheel geometry and documented maintenance references tied to the same chassis code and equipment scope.

3verified facts
3fitment references
1service references
1step-by-step guides
Before you buy or service: The individual vehicle tyre placard and exact fitted wheel/tyre configuration remain the final authority. PCD or offset alone is not complete fitment approval.
Exact answers

Specifications & capacities

3 source-backed
Purchase-adjacent reference

Parts & fitment

3 exact references
Transmission controlsVerified Oct 2, 2026

Paddle-shift equipment

Paddle shift · type-dependent

Equipment reference only; confirm grade and steering-wheel/transmission configuration.

Honda Motor Co., Ltd. source ↗
Tyres & wheelsVerified Oct 1, 2026

Factory tire sizes

185/60R15 84H or 185/55R16 83V

Fitment depends on wheel equipment. Confirm the tire placard on the vehicle.

Honda Motor Co. source ↗
Tyres & wheelsVerified Oct 1, 2026

Factory tire sizes

185/60R15 84H or 185/55R16 83V

Actual fitment depends on trim and wheel equipment; confirm the vehicle placard before replacement.

Honda Motor Co. source ↗
Manufacturer-backed service

Maintenance & repair references

1 documented
tiresCondition based

Tyre-pressure service reference

Use the owner-manual pressure specified for the fitted Grace wheel/tire configuration.

Published GM4 fact range is 220–230 kPa front / 210 kPa rear depending on configuration; door placard is final check.
Honda Japan Grace Hybrid owner manual ↗
Owner procedure

Step-by-step guides

Keep the exact code

Continue ownership research

Related exact-code clusters

Other service & fitment areas

CarFactBook keeps manufacturer evidence, fitment notes and service caveats attached to the exact model code. This page is a reference layer, not proof of the condition or equipment of an individual used vehicle.