Exact-code service & fitment

Toyota Premio NZT260: Tyre pressure, wheel fitment & maintenance

Keep pressure, tyre package, wheel geometry and documented maintenance references tied to the same chassis code and equipment scope.

5verified facts
4fitment references
2service references
0step-by-step guides
Before you buy or service: The individual vehicle tyre placard and exact fitted wheel/tyre configuration remain the final authority. PCD or offset alone is not complete fitment approval.
Exact answers

Specifications & capacities

5 source-backed
Purchase-adjacent reference

Parts & fitment

4 exact references
Service fluidsVerified Oct 1, 2026

CVT fluid — 1NZ-FE FF

Toyota CVT Fluid TC; 8.09 L reference capacity

Exact 1NZ-FE front-wheel-drive reference. Toyota says to consult a dealer when replacement is required.

Toyota Motor Corporation source ↗
Tyres & wheelsVerified Oct 1, 2026

Factory tire size — 2012 1.5F

185/65R15 88S

Confirm the tire placard because equipment can vary by grade and production period.

Toyota Motor Corporation source ↗
Tyres & wheelsVerified Oct 1, 2026

Factory tires — 2012 1.5F

185/65R15 88S

Grade-specific reference; confirm the tire placard and production period.

Toyota Motor Corporation source ↗
Tyres & wheelsVerified Oct 2, 2026

Factory wheel/tire/pressure — 2012 1.5F

185/65R15 88S · 15×6J · 230 kPa front / 230 kPa rear

For the 1.5-litre configuration in the cited manual; the individual tire placard remains the final check.

Toyota Motor Corporation source ↗
Manufacturer-backed service

Maintenance & repair references

2 documented
fluidsCondition based

CVT fluid service reference — 1NZ-FE FF

When CVT-fluid replacement is required on the 1NZ-FE front-wheel-drive configuration, use Toyota CVT Fluid TC; the manual gives 8.09 L as a reference capacity.

Toyota does not provide a fixed replacement interval in the cited specification section and directs owners to consult a Toyota dealer when replacement is required.
Toyota Japan Premio 2012 owner manual ↗
tiresCondition based

Tyre pressure service reference — 2012 1.5F

For the cited 1.5-litre factory 185/65R15 88S setup, use 230 kPa cold pressure at the front and rear.

No check interval is inferred. Confirm the individual vehicle tire placard and fitted wheel/tire package.
Toyota Japan Premio 2012 owner manual ↗
Keep the exact code

Continue ownership research

Related exact-code clusters

Other service & fitment areas

CarFactBook keeps manufacturer evidence, fitment notes and service caveats attached to the exact model code. This page is a reference layer, not proof of the condition or equipment of an individual used vehicle.