Mazda Axela BM2FS specs & reference
Source-backed reference for the 2018–2019 Mazda Axela BM2FS. Start with the most useful engine, fluid, tire, battery and fuel facts, then explore parts, maintenance, recalls and market coverage.
Jump straight to the ownership answer.
4.8 L oil only / 5.1 L with filter
Engine oil refill capacity
205/60R16: 250/250 kPa F/R; 215/45R18: 240/230 kPa F/R
Tire pressure
CR2025
Key fob battery
8.7 L MT / 8.9 L AT
Engine coolant capacity
Mazda ATF FZ · 8.0 L
Automatic transmission fluid
What CarFactBook currently knows about this car.
1 official campaign mapped to this model code. Confirm the exact chassis number before treating a campaign as applicable.
Review campaign record →7 source-backed replacement or fitment references available for this exact code.
Browse parts references →Location-specific valuation coverage is still being built for this code.
Open valuation evidence →Maintenance cards show documented intervals, not a claim that your individual car is currently due. Your mileage, service history and market can change what applies.
Mazda Axela BM2FS quick facts
Recently verified for this code
Reference dashboard
A quick view of what CarFactBook has already verified for this exact model code and which ownership areas are still being researched.
Oil, coolant, capacities and service fluids.
5 facts12V batteries, key batteries and electrical references.
1 factsPressure, factory sizes, wheel fitment and related data.
1 factsTank capacity, fuel requirements and range-related references.
2 factsBulb types, lamp specifications and lighting references.
Wiper sizing and exterior replacement references.
Intervals, scheduled service work and replacement timing.
3 itemsOfficial recalls, campaigns and safety notices.
1 campaignsBatteries, bulbs, wipers, filters and exact-model replacement references.
7 referencesEvidence-based market valuation by country and condition.
Coverage is measured across CarFactBook's current ten reference areas. It is not a claim that every possible fact about the vehicle is documented.
Exact reference
- Make
- Mazda
- Model
- Axela
- Chassis / model code
- BM2FS
- Covered years
- 2018–2019
- Verified facts
- 26
- Parts references
- 7
Maintenance timeline
Only intervals we can tie to documentation for this model code are shown. More service items are added as their applicability is verified.
Engine oil
Replace engine oil every 10,000 km or 12 months under normal use.
Engine oil filter
Replace the oil filter every 10,000 km or 12 months under normal use.
Diesel fuel filter
Replace the diesel fuel filter every 60,000 km.
Recalls & safety campaigns
Campaigns shown here have been manually mapped to this model code from manufacturer records.
Axela front-wiper control-module recall
Mazda reported that the front body control module could develop poor electrical continuity at the internal wiper relay because of the relay-contact design and its combination with the wiper motor.
The front windshield wipers may stop operating.
Mazda replaces the front body control module with a countermeasure part.
Exact model code BM2FS; official affected ranges include BM2FS-107276 through 108858 and BM2FS-200001 through 201955. Model code alone does not prove an individual vehicle is affected.
Parts & replacement references
Exact replacement specifications already verified for this model code. CarFactBook does not guess aftermarket compatibility from a similar-looking vehicle.
Replace when the key range becomes unstable or the indicator no longer lights; confirm the key design for the exact production period.
Applies only to automatic-transmission vehicles where the code also spans a manual configuration.
Use Mazda-specified coolant; Golden coolant has its own extended replacement schedule where the vehicle is marked for it.
Refill reference; verify final level with the dipstick and follow the exact engine/production-period procedure.
Use the exact oil standard specified for the engine; unsuitable diesel oil can accelerate DPF deterioration.
Applies only to 6MT configurations.
Confirm the fitted tire size and the driver-door pressure placard before inflation.
Fitment can vary by trim, equipment and production change. Where the source states a configuration condition, that condition controls over the model-code label alone.
Vehicle valuation
Asking-price evidence only becomes public after the minimum comparable-data threshold is met.
CarFactBook only publishes a market estimate after collecting enough comparable observations for this exact model code and market. A foreign-market value is never relabeled as a local valuation.
Compare common ownership questions
Every published fact for BM2FS
Everything below is grouped by ownership area and links to its own answer page with source and verification date.