Find replacement references tied to the exact model or chassis code. Every published item keeps its source, applicability note and verification date visible.
1 exact vehicle represented
Q-85 on SKYACTIV-G 1.5 i-stop models
Battery specification depends on engine and equipment. Confirm i-stop fitment and production period before purchasing.
CR2025
Mazda recommends dealer replacement to avoid damaging the key. Confirm that your key case matches the manual before opening it.
Ventilated disc front · disc rear
Architecture reference only; exact pads/discs must be matched to the individual vehicle.
Mazda BF-3 (DOT 3)
Use Mazda BF-3 / DOT 3 as specified; follow the maintenance schedule for replacement timing.
5.8 L reference capacity for SKYACTIV-G 1.5 automatic 2WD
Exact capacity depends on engine/drivetrain configuration. This reference is for SKYACTIV-G 1.5 automatic 2WD.
P5-VPS · SKYACTIV-G 1.5 · 1,496 cc · 74.5×85.8 mm · 13.0:1 · direct injection
Detailed P5-VPS architecture for the cited BM5FS 1.5L specification.
Air-conditioning filter for the documented Axela owner-manual application
Mazda gives a replacement schedule for this filter; confirm the exact production-period filter before purchase.
Replaceable engine air-cleaner element; 50,000 km normal replacement interval
Mazda reduces the replacement interval to 25,000 km under severe conditions. Confirm the exact production-period element before ordering.
NGK ILKAR7L11 or DENSO ZC20HPR11
SKYACTIV-G 1.5 fitment; Mazda specifies iridium plugs. Confirm engine and production period before purchase.
WY21W (7440NA) · 21 W
Confirm fitted lamp assembly and production equipment before replacement.
WY21W (7440NA), 21 W
Check fitted lamp assembly and production equipment before replacement.
HB3 (9005) · 60 W
Only for halogen-headlamp-equipped vehicles; LED-equipped vehicles differ.
H11 · 55 W
Only for halogen-headlamp-equipped vehicles; LED-equipped vehicles differ.
3.9 L without filter / 4.2 L with filter
Service-quantity reference only. Confirm oil grade/viscosity from the applicable manual section for the exact operating conditions.
Rack-and-pinion with electric power steering
Applies to the cited BM5FS 1.5-litre configuration; confirm replacement steering components by VIN/model code and production period.
MacPherson strut front · multi-link rear
Architecture reference only; not a replacement-part number.
SKYACTIV-DRIVE 6EC-AT
Applies to BM5FS automatic grades; confirm transmission before ordering/service.
Mazda ATF FZ; 7.2 L reference capacity
Confirm automatic-transmission configuration and production period before service.
4.605 automatic / 4.388 manual
Transmission-specific BM5FS 1.5L manufacturer values.
SKYACTIV-MT 6MT
Applies to BM5FS manual grades; confirm transmission before ordering/service.
1st 3.529 · 2nd 2.025 · 3rd 1.348 · 4th 1.000 · 5th 0.742 · 6th 0.594 · reverse 2.994
Exact ratio set for the cited BM5FS 1.5L automatic specification.
1st 3.583 · 2nd 1.904 · 3rd 1.290 · 4th 1.028 · 5th 0.837 · 6th 0.680 · reverse 3.454
Exact ratio set for the cited BM5FS 1.5L manual specification.
205/60R16 92V on 16×6.5J or 215/45R18 89W on 18×7J; 50 mm offset; 114.3 mm PCD
Actual tire/wheel package varies by grade. Confirm the driver-door tire placard before purchasing.
205/60R16: 250/250 kPa; 215/45R18: 240/220 kPa front/rear
Exact BM5FS reference from Mazda owner-manual data; confirm the fitted factory tyre size and placard.
50.0 mm
Documented for the listed 16×6.5J and 18×7J factory wheel packages; verify wheel marking and tire placard before fitment.
108–147 N·m
Mazda owner-manual tightening range for the documented Axela configuration.
114.3 mm PCD
PCD alone is not enough to determine wheel compatibility; confirm stud count, offset, center bore, tire size and clearance independently.
Fitment is attached to the applicable model or chassis code, not just a badge name.
The source publisher, source document and verification date stay visible with the reference.
Where trim, equipment or production period changes fitment, the published note tells you to verify it.
