JG3 · 2020–present · Japan
No verified photo for this configuration.
JG2 · 2012–2020 · Japan
all-wheel drive instead of front-wheel drive
2012–2020 · Japan · JG2
Derived from the same manufacturer-backed drivetrain-and-transmission record for this chassis.
Honda · Honda N-ONE 2015 specifications ↗| Drivetrain | FF Exact-code reference. |
|---|---|
| Engine bore × stroke | 60.0 × 77.6 mm Applies to NA and turbo variants. |
| Engine code | S07B NA and turbo tune differ by grade. |
| Engine code and displacement | S07B · 658 cc NA and turbo tune differ by grade. |
| Engine displacement | 658 cc NA and turbo tune differ by grade. |
| Engine layout | Water-cooled transverse inline-three · DOHC chain drive Second-generation specification. |
| Engine output and torque by type | NA 43 kW (58 PS) / 65 Nm · turbo 47 kW (64 PS) / 104 Nm Confirm engine type/grade. |
| Fuel type | Regular unleaded gasoline Manufacturer specification. |
| Transmission options | CVT on most grades; 6-speed manual on RS JG3 transmission depends on grade; JG4 is CVT. |
| WLTC fuel economy by cited grade | NA reference 23.2 km/L · turbo CVT 21.9 km/L · RS 6MT 21.6 km/L Official test-cycle values; confirm grade and real-world use differs. |
| Exterior dimensions | 3,395 × 1,475 × 1,545 mm Roof/grade specification reference. |
|---|---|
| Factory wheel rim width | 4.5J Wheel diameter, material and inset vary by grade. |
| Interior dimensions | 2,050 × 1,300 × 1,195 mm Manufacturer specification reference. |
| Interior height | 1,195 mm Derived from the same manufacturer-backed interior-dimensions record for this chassis. |
| Interior length | 2,050 mm Derived from the same manufacturer-backed interior-dimensions record for this chassis. |
| Interior width | 1,300 mm Derived from the same manufacturer-backed interior-dimensions record for this chassis. |
| Overall height | 1,545 mm Derived from the same manufacturer-backed exterior-dimensions record for this chassis. |
| Overall length | 3,395 mm Derived from the same manufacturer-backed exterior-dimensions record for this chassis. |
| Overall width | 1,475 mm Derived from the same manufacturer-backed exterior-dimensions record for this chassis. |
| Seating capacity | 4 occupants Exact-code family reference. |
| Wheelbase | 2,520 mm Exact-code family reference. |
| Engine oil capacity | 2.4 L without filter / 2.8 L with filter Refill quantity is a service reference; verify the oil level after filling. |
|---|---|
| Engine oil capacity — with filter | 2.8 L Refill quantity is a service reference; verify the oil level after filling. |
| Engine oil capacity — without filter | 2.4 L Refill quantity is a service reference; verify the oil level after filling. |
| Engine oil service interval | NA: 10,000 km or 12 months; severe 5,000 km or 6 months · Turbo: 5,000 km or 6 months Use the interval matching the engine type and whichever distance/time limit comes first. |
| Fuel tank capacity | 27 L Second-generation reference. |
| Oil filter service interval | NA: 20,000 km or 24 months; severe 10,000 km or 12 months · Turbo: 10,000 km or 12 months Use the interval matching the engine type and operating conditions. |
| Factory tyre sizes | 155/65R14 75S or 165/55R15 75V depending grade Confirm the exact fitted grade/wheel package. |
|---|
| 12V battery | M-42R · 32 Ah (5-hour rate) / 40 Ah (20-hour rate) Use the specified idling-stop-compatible battery; confirm the installed battery and production period before replacement. |
|---|---|
| Smart key battery | CR1632 Production-period specific: Honda lists CR1632 for 2020-11 through 2025-10 models; later models use CR2032. |
| Compression ratio by engine type | NA 12.0:1 · turbo 9.8:1 Confirm engine type/grade. |
|---|---|
| Factory wheel inset (offset) | 40 mm on 14-inch wheels · 45 mm on 15-inch wheels Exact fitment depends on grade and wheel size. |
| Minimum ground clearance | 135 mm on cited FF grades; RS reference 140 mm JG3 differs slightly on the RS reference. |
| Steering type | Rack-and-pinion electric power steering Exact-code family reference. |
| Wheel bolt-hole count | 4 holes Hole count alone does not establish wheel compatibility. |
| Wheel hub diameter | 56 mm Confirm the replacement wheel is compatible with the complete factory fitment. |
| Wheel PCD | 100 mm Use the complete factory fitment for the specific grade when replacing wheels. |
5,000 km / 6 months
For turbo engines, replace engine oil every 5,000 km or 6 months. Applies to the turbo configuration.
Schedule source ↗10,000 km / 12 months
For naturally aspirated engines, replace engine oil every 10,000 km or 12 months under normal use. Severe use: 5,000 km or 6 months.
Schedule source ↗Add your owned car to My Garage to keep its maintenance and expenses together in this browser. Your buying shortlist is separate.
Saved in this browser, separately from My Garage.
Use Save on any car to add it here.
