JH2 · 2013–2019 · Japan
No verified photo for this configuration.
JH1 · 2013–2019 · Japan
front-wheel drive instead of all-wheel drive
2013–2019 · Japan · JH1
Representative grade values are identified where the same chassis code spans naturally aspirated/turbo or trim differences.
Honda Motor Co. · Honda N-WGN 2019 specifications ↗| Drivetrain | 4WD |
|---|---|
| Engine code | S07A |
| Engine code and displacement | S07A · 658 cc |
| Engine displacement | 658 cc |
| Fuel type | Regular unleaded gasoline |
| JC08 fuel economy | 26.2 km/L on cited naturally aspirated 4WD grade |
| Transmission | CVT |
Representative grade values are identified where the same chassis code spans naturally aspirated/turbo or trim differences.
| Dimensions | 3,395 × 1,475 × 1,675 mm Representative grade values are identified where the same chassis code spans naturally aspirated/turbo or trim differences. |
|---|---|
| Factory wheel rim width | 4.5J Wheel diameter and inset can vary by grade; match the complete wheel specification. |
| Minimum turning radius | 4.7 m Representative grade values are identified where the same chassis code spans naturally aspirated/turbo or trim differences. |
| Overall height | 1675 mm Representative grade values are identified where the same chassis code spans naturally aspirated/turbo or trim differences. |
| Overall length | 3395 mm Representative grade values are identified where the same chassis code spans naturally aspirated/turbo or trim differences. |
| Overall width | 1475 mm Representative grade values are identified where the same chassis code spans naturally aspirated/turbo or trim differences. |
| Representative curb weight | 880 kg on cited naturally aspirated 4WD grade Representative grade values are identified where the same chassis code spans naturally aspirated/turbo or trim differences. |
| Wheelbase | 2,520 mm Representative grade values are identified where the same chassis code spans naturally aspirated/turbo or trim differences. |
| Brake fluid | Honda DOT3 or DOT4 brake fluid Use fluid meeting the manufacturer specification. |
|---|---|
| Engine coolant capacity | NA: 2.64 L · Turbo: 2.68 L, including 0.330 L reservoir Confirm engine configuration; quantities include the stated reservoir amount. |
| Engine oil capacity | 2.4 L without filter / 2.6 L with filter Refill quantity is a service reference; verify the oil level after filling. |
| Engine oil capacity — with filter | 2.6 L Refill quantity is a service reference; verify the oil level after filling. |
| Engine oil capacity — without filter | 2.4 L Refill quantity is a service reference; verify the oil level after filling. |
| Fuel tank capacity | 30 L Representative grade values are identified where the same chassis code spans naturally aspirated/turbo or trim differences. |
| Rear differential oil | Honda ULTRA HGO-μ · 0.34 L at replacement Applies to the 4WD chassis. |
| Transfer fluid | Honda ULTRA DPSF-II · 0.43 L at replacement Applies to the 4WD chassis. |
| Transmission fluid | Honda ULTRA HMMF This applies to the cited first-generation N-WGN owner manual. |
| Transmission fluid replacement capacity | 2.0 L This is the replacement quantity, not dry-fill capacity. |
| Washer fluid capacity | 1.5 L Capacity is the owner-manual reference value. |
| Factory tyre sizes | 155/65R14 75S; 165/55R15 75V on cited Custom option Representative grade values are identified where the same chassis code spans naturally aspirated/turbo or trim differences. |
|---|---|
| Tyre pressure | 155/65R14: 240/230 kPa front/rear · 165/55R15: 210/210 kPa Match the factory tyre size and verify the driver-door placard. |
| 12V battery | M-42R · 32 Ah (5-hour rate) |
|---|---|
| Smart key battery | CR1632 |
Representative grade values are identified where the same chassis code spans naturally aspirated/turbo or trim differences.
| Factory wheel fitment range | 4.5J rim · 40 mm offset; 45 mm offset on cited 15-inch option Wheel size and offset are grade-dependent. |
|---|---|
| Factory wheel inset (offset) | 40 mm; 45 mm on cited 15-inch option Exact wheel package can vary by grade; match the complete wheel specification. |
| Front turn-signal bulb | 12V 21W amber Applies to the cited first-generation factory lamp equipment. |
| Headlamp type | Discharge 12V 35W or halogen 12V 60/55W depending equipment Confirm the exact factory headlamp equipment before replacement. |
| License plate bulb | 12V 5W Confirm the installed lamp before replacement. |
| Position lamp type | LED or 12V 5W depending headlamp equipment Confirm the exact factory headlamp equipment. |
| Rear turn-signal bulb | 12V 21W amber Confirm the installed lamp before replacement. |
| Reverse lamp bulb | 12V 16W Confirm the installed lamp before replacement. |
| Spark plug specification | NA: DENSO DXE22HCR11S · Turbo: NGK ILZKAR8F8S or DENSO SXE24HCR8S Confirm the exact engine configuration before ordering plugs. |
| Steering size and adjustment | 370 mm diameter · 29 mm tilt · no telescopic adjustment The C type is listed without tilt adjustment. |
| Wheel bolt-hole count | 4 holes Use with the 100 mm PCD specification. |
| Wheel hub diameter | 56 mm Confirm aftermarket center-bore compatibility. |
| Wheel PCD | 100 mm Use with the four-hole wheel specification. |
Honda service quantity: 2.4 L for oil-only service or 2.6 L when the oil filter is replaced. This is a service quantity reference. No replacement interval is inferred from the cited specification.
Schedule source ↗Use Honda ULTRA HMMF; Honda lists 2.0 L as the CVT fluid replacement quantity. Applies to the documented older JH2 generation; do not substitute newer HCF-2 guidance.
Schedule source ↗Engine oil · scope and source ↗
Add your owned car to My Garage to keep its maintenance and expenses together in this browser. Your buying shortlist is separate.
Saved in this browser, separately from My Garage.
Use Save on any car to add it here.
_front.jpg){kind=link}