Change carNSP135 · Japan
_Rear.JPG){kind=link}
Toyota Vitz
NSP135 · 2015–2017 reference · Japan
- Engine
- 1NR-FE · 1,329 cc
- Transmission
- Super CVT-i
- Fuel tank
- 42 L
- Drive
- Full-time 4WD
Full specifications
Engine & powertrain12
| Drivetrain | Full-time 4WD Derived from the same manufacturer-backed drivetrain-and-transmission record for this chassis. |
|---|---|
| Drivetrain and transmission | Full-time 4WD · Super CVT-i |
| Engine bore × stroke | 72.5 × 80.5 mm |
| Engine code | 1NR-FE |
| Engine code and displacement | 1NR-FE · 1,329 cc |
| Engine displacement | 1,329 cc |
| Engine output | 70 kW (95 PS) at 6,000 rpm |
| Engine output and torque | 70 kW (95 PS) at 6,000 rpm · 119 N·m at 4,000 rpm |
| Engine torque | 119 N·m at 4,000 rpm |
| Fuel type | Regular unleaded gasoline |
| JC08 fuel economy | 18.0 km/L |
| Transmission | Super CVT-i Derived from the same manufacturer-backed drivetrain-and-transmission record for this chassis. |
Dimensions & seating11
| Curb weight | 1,080 kg |
|---|---|
| Exterior dimensions | 3,885 × 1,695 × 1,530 mm |
| Interior dimensions | 1,920 × 1,390 × 1,250 mm |
| Interior height | 1,250 mm Derived from the same manufacturer-backed interior-dimensions record for this chassis. |
| Interior length | 1,920 mm Derived from the same manufacturer-backed interior-dimensions record for this chassis. |
| Interior width | 1,390 mm Derived from the same manufacturer-backed interior-dimensions record for this chassis. |
| Minimum turning radius | 4.5 m |
| Overall height | 1,530 mm Derived from the same manufacturer-backed exterior-dimensions record for this chassis. |
| Overall length | 3,885 mm Derived from the same manufacturer-backed exterior-dimensions record for this chassis. |
| Overall width | 1,695 mm Derived from the same manufacturer-backed exterior-dimensions record for this chassis. |
| Wheelbase | 2,510 mm |
Capacities & service fluids10
| Brake fluid | Toyota Brake Fluid 2500H-A Fluid specification only; use the proper service/bleeding procedure. |
|---|---|
| CVT fluid | Toyota CVT Fluid FE · 7.88 L reference capacity Toyota advises dealer consultation when replacement is required; this is a specification/reference capacity. |
| Engine coolant capacity | Toyota Super Long Life Coolant · 4.7 L Use the manufacturer refill/bleeding procedure and confirm the final level. |
| Engine oil capacity | 3.2 L oil-only / 3.4 L with oil filter Reference refill quantity; confirm the final level after service. |
| Engine oil capacity — with filter | 3.4 L Split from the same manufacturer-backed engine-oil capacity specification for this chassis. |
| Engine oil capacity — without filter | 3.2 L Split from the same manufacturer-backed engine-oil capacity specification for this chassis. |
| Fuel tank capacity | 42 L |
| Rear differential oil — 4WD | Toyota Hypoid Gear Oil SX (API GL-5 SAE 85W-90) · 0.5 L 4WD specification for NSP135. |
| Transfer oil — 4WD | Toyota Hypoid Gear Oil SX (API GL-5 SAE 85W-90) · 0.45 L 4WD specification for NSP135. |
| Washer fluid capacity | 1.8 L standard / 2.3 L cold-region specification Confirm whether the vehicle is a cold-region specification. |
Tyres & wheels3
| Factory tyre size | 165/70R14 |
|---|---|
| Factory wheel size | 14 × 5J with 165/70R14 81S Confirm the installed factory package before replacement. |
| Tyre pressure | 250 kPa front / 240 kPa rear for 165/70R14 The driver-door tyre placard is the final check. |
Battery & charging1
| Key battery | CR2016 without Smart Entry & Start / CR1632 with Smart Entry & Start Confirm which key system is fitted before opening the key case. |
|---|
Safety & equipment1
Other published specifications13
| Cabin air filter replacement interval | 20,000 km; 10,000 km in high-traffic/dusty or cold-region conditions Replace earlier if airflow drops or local dust conditions are severe. |
|---|---|
| Front / rear track | 1,485 / 1,470 mm |
| Front fog lamp bulb | H16 · 19 W where fitted Fog-lamp equipment varies by grade/options. |
| Front turn-signal bulb | 21 W Confirm installed equipment before replacement. |
| Headlamp bulb types | Halogen: H4 60/55 W · LED-equipped high beam: HB3 60 W · discharge-equipped high beam: H11 55 W Identify the installed headlamp system before ordering bulbs; some lamps are LED. |
| License plate bulb | 5 W Confirm installed equipment before replacement. |
| Rear fog lamp bulb | 21 W where fitted Rear fog-lamp equipment varies by grade/options. |
| Rear turn-signal bulb | 21 W Confirm installed equipment before replacement. |
| Reverse lamp bulb | 16 W Confirm installed equipment before replacement. |
| Side turn-signal bulb | 5 W Confirm installed equipment before replacement. |
| Steering type | Power-assisted rack-and-pinion |
| Suspension layout | Strut front · torsion-beam rear |
| Tail lamp bulb | 5 W The manual excludes G's and RS from this 5 W tail-lamp entry. |
Before you buy
Service references
Sources and next step
View 2 evidence sources
- Toyota Vitz 2015 F NSP135 catalog ↗Toyota · Verified
- Toyota Japan Vitz 2014 owner manual ↗Toyota Motor Corporation · Verified
Bought it?
Add your owned car to My Garage to keep its maintenance and expenses together in this browser. Your buying shortlist is separate.
Saved cars
Saved in this browser, separately from My Garage.
Use Save on any car to add it here.