Honda N-BOX

JF1 · 2011–2017 · Japan

Compare with

Photo unavailable for this exact code

JF2 · 2011–2017 · Japan

all-wheel drive instead of front-wheel drive

Why compare?

4WD

2011–2017 · Japan · JF2

Derived from the same manufacturer-backed drivetrain-and-transmission record for this chassis.

Engine & powertrain8

Drivetrain	FF Derived from the same manufacturer-backed drivetrain-and-transmission record for this chassis.
Drivetrain and transmission	FF · CVT Turbo grades use a paddle-shift/manual-mode CVT calibration.
Engine code	S07A Output varies between naturally aspirated and turbo grades.
Engine code and displacement	S07A · 658 cc Output varies between naturally aspirated and turbo grades.
Engine displacement	658 cc Output varies between naturally aspirated and turbo grades.
Engine output	43 kW (58 PS) NA / 47 kW (64 PS) turbo Match output to the exact engine/grade.
JC08 fuel economy	Up to 24.2 km/L on cited non-turbo FF grades Turbo and equipment differences can reduce the official figure.
Transmission	CVT Derived from the same manufacturer-backed drivetrain-and-transmission record for this chassis.

Dimensions & seating6

Exterior dimensions	3,395 × 1,475 × 1,780 mm Some special/Custom configurations can differ in trim and equipment, but the basic body dimensions shown are factory values.
Factory wheel rim width	4.00B–4.5J depending on grade Wheel diameter and inset can vary by grade; match the complete wheel specification.
Overall height	1780 mm Some special/Custom configurations can differ in trim and equipment, but the basic body dimensions shown are factory values.
Overall length	3395 mm Some special/Custom configurations can differ in trim and equipment, but the basic body dimensions shown are factory values.
Overall width	1475 mm Some special/Custom configurations can differ in trim and equipment, but the basic body dimensions shown are factory values.
Wheelbase	2,520 mm

Capacities & service fluids1

Fuel tank capacity	35 L

Tyres & wheels1

Factory tyre sizes	155/65R14 75S; turbo grades 165/55R15 75V Confirm the exact grade before buying tyres.

Other published specifications5

Factory wheel fitment range	4.00B–4.5J rim · 35–45 mm offset depending on grade Exact wheel size, rim width and offset are grade-dependent.
Factory wheel inset (offset)	35–45 mm depending on grade Exact wheel package can vary by grade; match the complete wheel specification.
Wheel bolt-hole count	4 holes Use with the 100 mm PCD specification.
Wheel hub diameter	56 mm Confirm aftermarket center-bore compatibility.
Wheel PCD	100 mm Use with the four-hole wheel specification.