JF2 · 2011–2017 · Japan
No verified photo for this configuration.
JF1 · 2011–2017 · Japan
front-wheel drive instead of all-wheel drive
2011–2017 · Japan · JF1
Derived from the same manufacturer-backed drivetrain-and-transmission record for this chassis.
Honda · Honda N-BOX 2013 official specifications ↗| Drivetrain | 4WD Derived from the same manufacturer-backed drivetrain-and-transmission record for this chassis. |
|---|---|
| Drivetrain and transmission | 4WD · CVT Turbo grades use a paddle-shift/manual-mode CVT calibration. |
| Engine code | S07A Output varies between naturally aspirated and turbo grades. |
| Engine code and displacement | S07A · 658 cc Output varies between naturally aspirated and turbo grades. |
| Engine displacement | 658 cc Output varies between naturally aspirated and turbo grades. |
| Engine output | 43 kW (58 PS) NA / 47 kW (64 PS) turbo Match output to the exact engine/grade. |
| JC08 fuel economy | Up to 22.6 km/L on cited non-turbo 4WD grades Turbo and equipment differences can reduce the official figure. |
| Transmission | CVT Derived from the same manufacturer-backed drivetrain-and-transmission record for this chassis. |
| Exterior dimensions | 3,395 × 1,475 × 1,800 mm Some special/Custom configurations can differ in trim and equipment. |
|---|---|
| Factory wheel rim width | 4.00B–4.5J depending on grade Wheel diameter and inset can vary by grade; match the complete wheel specification. |
| Overall height | 1800 mm Some special/Custom configurations can differ in trim and equipment. |
| Overall length | 3395 mm Some special/Custom configurations can differ in trim and equipment. |
| Overall width | 1475 mm Some special/Custom configurations can differ in trim and equipment. |
| Wheelbase | 2,520 mm |
| Fuel tank capacity | 30 L |
|---|
| Factory tyre sizes | 155/65R14 75S; turbo grades 165/55R15 75V Confirm the exact grade before buying tyres. |
|---|
| Factory wheel fitment range | 4.00B–4.5J rim · 35–45 mm offset depending on grade Exact wheel size, rim width and offset are grade-dependent. |
|---|---|
| Factory wheel inset (offset) | 35–45 mm depending on grade Exact wheel package can vary by grade; match the complete wheel specification. |
| Wheel bolt-hole count | 4 holes Use with the 100 mm PCD specification. |
| Wheel hub diameter | 56 mm Confirm aftermarket center-bore compatibility. |
| Wheel PCD | 100 mm Use with the four-hole wheel specification. |
Add your owned car to My Garage to keep its maintenance and expenses together in this browser. Your buying shortlist is separate.
Saved in this browser, separately from My Garage.
Use Save on any car to add it here.
_front.JPG){kind=link}