Toyota · ZSU60W · 2017–2020
Toyota Harrier ZSU60W Tyre pressure
What tyre pressure should a Toyota Harrier ZSU60W use?240 kPa front and rear on 225/65R17 102H; 220 kPa front and rear on 235/55R18 100H or 235/50R19 99V (cold) (Toyota 2017-09 to 2020-05 manual edition)
Found an incorrect value or applicability claim? Report an error ↗. Correction policy →
At a glance
- Vehicle
- Toyota Harrier ZSU60W
- Tyre pressure
- 240 kPa front and rear on 225/65R17 102H; 220 kPa front and rear on 235/55R18 100H or 235/50R19 99V (cold) (Toyota 2017-09 to 2020-05 manual edition)
- Manufacturer source
- Toyota Motor Corporation
- Verified
Cold tyre pressures by factory tyre size from the Toyota Harrier owner's manual.
Reference details
Check before you buy or service: Applies only to cars covered by Toyota's Harrier owner's manual for production 2017-09 to 2020-05 (PDF harrier_201709); other production years are not established by this source. Japan-market Toyota Harrier ZSU60W (3ZR-FAE 2.0 L petrol, front-wheel drive), per the manual's own 車両仕様 table. One pressure applies to front and rear for each size; the fitted size depends on grade and is shown on the driver's-side label. Source SHA-256 fab5b556676d0cf4dda8a80ca43997d6a6364f3cbd6ecd58c2fa5b7df23cac9e.
Source
Toyota Motor Corporation manufacturer referenceToyota Motor Corporation
Open manufacturer source ↗Last verified by CarFactBook:
Same question · different chassis
Does this answer change on another Harrier?
Tyre pressure is published for these other exact codes. Compare the sourced answer and vehicle scope before using a value.
Toyota Harrier ASU60W2017–2020 · Toyota Motor Corporation
240 kPa front and rear on 225/65R17 102H; 220 kPa front and rear on 235/55R18 100H or 235/50R19 99V (cold) (Toyota 2017-09 to 2020-05 manual edition)View original reference ↗
Compare ZSU60W and ASU60W profiles →A matching number does not establish that equipment, trim, production date or regional specification is identical.
Compare more Harrier chassis references →