Honda · GR6 · 2020–2022

Honda Fit GR6 Tyre pressure

What tyre pressure should a Honda Fit GR6 use?220 kPa front / 210 kPa rear (185/60R16 86H, cold) (Honda 2020–2021 manual editions)

Found an incorrect value or applicability claim? Report an error ↗. Correction policy →

At a glance

Vehicle
Honda Fit GR6
Tyre pressure
220 kPa front / 210 kPa rear (185/60R16 86H, cold) (Honda 2020–2021 manual editions)
Manufacturer source
Honda Motor Co., Ltd.
Verified

Cold tyre pressures by fitment from the Honda owner's manual vehicle specifications table. Source: Honda web owner's manual, 2020 edition (values identical in the 2021 edition).

Reference details

Check before you buy or service: Applies only to cars covered by Honda's 2020 and 2021 owner's manual editions; not established for 2022 production. Japan-market Honda Fit GR6 (LEB 1.5 L e:HEV hybrid (1,496 cc), front-wheel drive; grades e:HEV CROSSTAR), fourth generation, as covered by Honda's 2020 and 2021 web owner's manual editions (identical values). Honda published no 2022 edition, so 2022 production is not established by this source. Code, drive and grade per Honda's archived 2022 spec list. The 2023 FIT e:HEV manual repeats these values but adds a 185/60R15 88H tyre; that edition is not covered here. Source SHA-256 42fdd7584ef256e44842827513302421df6088e45ddca38bb6b1154a6cd7c166.

Source

Honda Motor Co., Ltd. manufacturer referenceHonda Motor Co., Ltd.
Open manufacturer source ↗

Last verified by CarFactBook:

Same question · different chassis

Does this answer change on another Fit?

Tyre pressure is published for these other exact codes. Compare the sourced answer and vehicle scope before using a value.

A matching number does not establish that equipment, trim, production date or regional specification is identical.

Compare more Fit chassis references →

Other chassis of the Honda Fit have independently documented answers. Compare all 6 exact-code tyre pressure references →

The same question, different cars

Manufacturer documentation can give different answers for different engines, configurations and model codes. These are independently sourced entries for the same reference topic, not interchangeable parts or service instructions.

Honda FitGP52013–2020
Tyre pressure220 kPa front / 210 kPa rearCheck the exact variant and source limitationsHonda Motor Co., Ltd. · verified 2026-10-02
Read the sourced answer ↗Vehicle profile →
Honda GraceGM42014–2020
Tyre pressure220–230 kPa front / 210 kPa rear depending on configurationCheck the exact variant and source limitationsHonda Motor Co. · verified 2026-09-28
Read the sourced answer ↗Vehicle profile →
Mazda AxelaBM5FS2013–2017
Tyre pressure205/60R16: 250/250 kPa; 215/45R18: 240/220 kPa front/rearCheck the exact variant and source limitationsMazda Motor Corporation · verified 2026-09-28
Read the sourced answer ↗Vehicle profile →
Honda VezelRU32013–2021
Tyre pressure210/200 kPa on 215/60R16 (16-inch), 220/210 kPa on 215/55R17 (17-inch) or 230/200 kPa on 225/50R18 (18-inch), front/rear by factory tyre sizeCheck the exact variant and source limitationsHonda Motor Co. · verified 2026-10-24
Read the sourced answer ↗Vehicle profile →

Compare this answer across other cars

Browse tyre pressure by model and chassis code →

What owners usually check next

Engine oil capacity2.9 L oil-only / 3.1 L with filter (Honda 2020–2021 manual editions)12V battery44B19L · 32 Ah (5-hour rate) / 40 Ah (20-hour rate) (Honda 2020–2021 manual editions)Transmission fluidHonda Ultra ATF DW-1 · 1.8 L replacement quantity for 2WD (Honda 2020–2021 manual editions)Coolant capacityHonda Ultra e-Coolant 50% · 3.85 L including 0.45 L reservoir (Honda 2020–2021 manual editions)Fuel tank capacity40 LEngine codeLEBEngine displacement1,496 ccDriven wheelsFF (2WD)

View every owner answer for Honda Fit GR6 →