Honda Vezel RU3 tyre pressure
Cold tyre pressure by factory tyre size
- 215/60R16 95H
- Front 210 kPa (≈30 psi) · Rear 200 kPa (≈29 psi)
- 215/55R17 94V
- Front 220 kPa (≈32 psi) · Rear 210 kPa (≈30 psi)
- 225/50R18 95V
- Front 230 kPa (≈33 psi) · Rear 200 kPa (≈29 psi)
From the cited Honda Motor Co. source record. Match the size printed on your tyres; the pressure label in the driver-door opening of your car takes precedence. psi values are approximate conversions.
Check the specification against your actual vehicle
This number belongs to the source-linked Honda Vezel RU3 reference, not every trim or model year. Before using it:
- Read the tyre size fitted to the car before selecting a pressure.
- Use the vehicle's cold-inflation placard for the installed wheel and load configuration.
From the original source record
- 215/60R16 95H
- Front 210 kPa / Rear 200 kPa
- 215/55R17 94V
- Front 220 kPa / Rear 210 kPa
- 225/50R18 95V
- Front 230 kPa / Rear 200 kPa
Check these related facts for the same chassis
Verified answer details
Honda’s September 2018 Vezel Hybrid owner’s manual (printed page 391) gives cold tyre pressures per factory size: 215/60R16 95H 210/200 kPa, 215/55R17 94V 220/210 kPa and 225/50R18 95V 230/200 kPa front/rear.
- 12V battery
- 44B19L (32Ah at 5-hour rate)
- Engine oil capacity
- 3.1 L without filter / 3.3 L with filter
- Fuel tank capacity
- 40 L
View every verified answer for Honda Vezel RU3 → Compare tyre pressure across exact cars → Open related service context →
Found an incorrect value or applicability claim? Report an error ↗. Correction policy →
At a glance
- Vehicle
- Honda Vezel RU3
- Tyre pressure
- 210/200 kPa on 215/60R16 (16-inch), 220/210 kPa on 215/55R17 (17-inch) or 230/200 kPa on 225/50R18 (18-inch), front/rear by factory tyre size
- Manufacturer source
- Honda Motor Co.
- Verified
Use this tyre pressure answer on the exact car
Continue with Honda Vezel RU3 parts, service, procedures and related owner answers without leaving the exact chassis context.
Reference details
- 215/60R16 95H
- Front 210 kPa / Rear 200 kPa
- 215/55R17 94V
- Front 220 kPa / Rear 210 kPa
- 225/50R18 95V
- Front 230 kPa / Rear 200 kPa
Source
Last verified by CarFactBook:
Step-by-step guide
More guides for the Honda Vezel RU3
Parts, fitment & service for this exact car
Keep this answer connected to the matching replacement references, manufacturer-backed maintenance and available procedures for Honda Vezel RU3.
Does this answer change on another Vezel?
Tyre pressure is published for these other exact codes. Compare the sourced answer and vehicle scope before using a value.
A matching number does not establish that equipment, trim, production date or regional specification is identical.
Compare more Vezel chassis references →Other chassis of the Honda Vezel have independently documented answers. Compare all 8 exact-code tyre pressure references →
Check the specification for another exact vehicle.
Manufacturer documentation can give different answers for different engines, configurations and model codes. These are independently sourced entries for the same reference topic, not interchangeable parts or service instructions.