Honda · GT7 · 2024–2025 · Japan
Honda Freed GT7 Tyre pressure What tyre pressure should a Honda Freed GT7 use? 250 kPa front / 240 kPa rear cold · 185/65R15 88S
Chassis check: this answer is for the Honda Freed GT7 (LEB · 4WD). Other Freed chassis have their own published answer. Some may share a value with one of the conditions above, so match your chassis code:
Freed GB5 (L15B · 1,496 cc · FF, 2016–2024): 240 kPa front · 230 kPa rearFreed GB6 (L15B · 1,496 cc · 4WD, 2016–2024): 240 kPa front · 230 kPa rearFreed GB7 (LEB-H1 · 1,496 cc · FF, 2016–2024): 240 kPa front · 230 kPa rearFreed GB8 (LEB-H1 · 1,496 cc · 4WD, 2016–2024): 240 kPa front · 230 kPa rearFreed GT3 (L15D · 4WD, 2024–2025): 240 kPa front / 240 kPa rear cold · 185/65R15 88SFreed GT4 (L15D · 4WD, 2024–2025): 240 kPa front / 240 kPa rear cold · 185/65R15 88SThe same published answer (250 kPa front / 240 kPa rear cold · 185/65R15 88S) is also cited for Freed GT1 (L15D · FF (2WD), 2024–2025), Freed GT2 (L15D · FF (2WD), 2024–2025) , Freed GT5 (LEB · FF (2WD), 2024–2025) , Freed GT6 (LEB · FF (2WD), 2024–2025) and Freed GT8 (LEB · 4WD, 2024–2025) ; other chassis are not covered unless listed.
Compare every Freed chassis tyre pressure reference →
Tyre / tire pressure unit reference 250 kPa ≈ 36 psi; 240 kPa ≈ 35 psi. Approximate unit conversion only; match the actual tyres, trim and manufacturer's cold-pressure placard. Never use the conversion as a substitute for the source.
+ Add to My Garage Share or copy Share fact Copy answer Copy Markdown Copy forum
Evidence Found an incorrect value or applicability claim? Report an error ↗ . Correction policy →
Honda specifies front and rear pressures for the 185/65R15 88S factory tyre on the cited AWD configuration.
Source Last verified by CarFactBook: 2026-11-16
Same question · different chassis Does this answer change on another Freed? Tyre pressure is published for these other exact codes. Compare the sourced answer and vehicle scope before using a value.
A matching number does not establish that equipment, trim, production date or regional specification is identical.
Compare more Freed chassis references → Other chassis of the Honda Freed have independently documented answers. Compare all 12 exact-code tyre pressure references →
The same question, different cars Manufacturer documentation can give different answers for different engines, configurations and model codes. These are independently sourced entries for the same reference topic, not interchangeable parts or service instructions.
Honda Freed GB5 2016–2024
Tyre pressure 240 kPa front · 230 kPa rear Check the exact variant and source limitations Honda Motor Co., Ltd. · verified 2026-10-04
Honda Fit GP5 2013–2020
Tyre pressure 220 kPa front / 210 kPa rear Check the exact variant and source limitations Honda Motor Co., Ltd. · verified 2026-10-02
Mazda Axela BM5FS 2013–2017
Tyre pressure 205/60R16: 250/250 kPa; 215/45R18: 240/220 kPa front/rear Check the exact variant and source limitations Mazda Motor Corporation · verified 2026-09-28
Honda Grace GM4 2014–2020
Tyre pressure 220–230 kPa front / 210 kPa rear depending on configuration Check the exact variant and source limitations Honda Motor Co. · verified 2026-09-28